357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com HS-169 single frequency oscillator 53.125mhz description the HS-169 crystal oscillator is designed to support the tachyon tm clocking requirements at 53.125mhz. features ? meets hp tachyon tm clock generator ? will withstand vapor phase temperatures of 253c for 4 minutes maximum ? space-saving alternative to discrete component oscillators ? high shock resistance, to 3000g ? all metal, resistance weld, hermetically sealed package ? low jitter ? high q crystal actively tuned oscillator circuit ? power supply decoupling internal ? no internal pll avoids cascading pll problems ? gold plated leads - solder dipped leads available upon request ? low power consumption ? rohs compliant, lead free construction (unless solder dipped leads are supplied) electrical connection pin connection 1 n.c. 7 grd & case 8 output 14 v cc crystal clock oscillators data sheet 9826b rev. g
357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com HS-169 continued single frequency oscillator 53.125mhz operating conditions and output characteristics electrical characteristics parameter symbol conditions min typical max duty cycle ----- @ v cc /2 45/55% ----- 55/45% logic 0 v ol @ 16ma ----- 0.3v 0.4v logic 1 v oh @ 0.4ma 2.4v 4.0v ----- rise & fall time tr,tf @ 0.4 to 2.4v ----- ----- 2.8 ns jitter, rms (2) ----- ----- ----- ----- 5 psec frequency stability (1) df/f overall conditions including: -100ppm ----- +100ppm voltage, calibration, temp., 20 yr aging, shock, vibration general characteristics parameter symbol conditions min typical max supply voltage v cc ----- 4.75v 5.0v 5.25v supply current i cc no load 0.0 ma ----- 60 ma output current i o ----- 0.0 ma ----- 25.0 ma operating temperature t a ----- 0c ----- 70c storage temperature t s ----- -55c ----- 125c power dissipation p d ----- ----- ----- 315 mw lead temperature t l soldering, 10 sec. ----- ----- 300c load ----- ----- ----- ----- 10 ttl gate start-up time t s ----- ----- ----- 3 ms environmental and mechanical characteristics mechanical shock per mil-std-202, method 213, condition e thermal shock per mil-std-833, method 1011, condition a vibration 0.060" double amplitude 10 hz to 55 hz, 35g?s 55hz to 2000 hz soldering condition 300c for 10 seconds hermetic seal leak rate less than 1 x 10 -8 atm.cc/sec of helium footnotes: 1) standard frequency stability (20,25,50ppm & others available) 2) jitter performance is frequency dependent. please contact factory for full characterization. rms jitter bandwidth of 12khz to 20mhz. test load: rev. g crystal clock oscillators hs - x 16x - freq package code tolerance/performance hs leaded 4 pin (14 pin) 0 100ppm 0-70c sm leaded 4 pin (14 pin) smd 1 50ppm 0-70c gull wing 7 25ppm 0-70c input voltage 9 customer specific code specification a 20ppm 0-70c a 3.3v b 50ppm -40 to +85c 5v c 100ppm -40 to +85c creating a part number data sheet 9826b
|